AEM Infinity packages have official been replaced by our Plug n Play ECU package from Motec, Haltech and Link. Please have a close look through these options and our guide to help break down the differences. If you have any questions don’t hesitate to contact us, we are here to ensure you get the best service and pricing on exactly the parts you need to reach your goals! Check out the link here: SR20det ECU tuning guide Best stand alone ECU
We now offer a complete plug and play AEM Infinity ECU package for all of the RWD SR20det and SR20de engines **S13, S14 and S15 engines including SR20VE engines are all supported by this ECU package!*** Our turn key package consists of the VE plug n play adapter harness + AEM Infinity 506 ecu + Brewed Custom base map. This is a plug and play package ready complete with base map to get your engine started when combined with our SR20 fuel systems utilizing Injector Dynamics injectors. These AEM Infinity packages have quickly become one of our most popular SR20det ECU kits delivering big smiles to SR enthusiasts around the world thanks to features like Rolling Launch Anti-lag, Flex Fuel and individual cylinder trims.
Velocity Element’s Plug & Play Adapter Harness for the Nissan SR20 engine is an easy to use plug and play solution for your Silvia, 240sx or what ever else you may have swapped over to use the SR. This package is available with both the Infinity 506 (30-7106) or 508 (PN 30-7108) ECU. We have been using this plug & play Infinity package on a wide range of SR’s with great success.
SR20det plug n play Infinity Harness Features
All Plug and Play VE adapter harness’s and Infinity ECU packages get you an instant $100 credit towards any of our custom Etune services. This includes our full Etune service for those that want a complete tune providing the best performance and reliability possible. Want to learn more about our tuning services? Check out the links below to get a better idea of exactly what we are up to.
VE Plug & Play Adapter Harness Standard Expansion Ports
The Velocity Element plug and play adpater harness for the SR20det and SR20de includes a 6 pin DTM Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, oil pressure/temp, air inlet temperature, shaft speed, VE wide band Knock sensors, exhaust MAP and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. For those who have added DBW or any other accessories we are here to support and offer custom plug and play harness options for anyone looking to expand and utilize more of the ECU’s supported features such as Drive By Wire.
VE Harness Expansion options:
- Traction Control 4 pin DTM connector
- 12 position map select switch 3 pin DTM connector
- Expansion harness for accessory sensors (up to 12 pin DTM connector)
- DBW DTM connector (let us know what drive by wire throttle you are using)
- Anti Lag solenoid output
- Rolling Launch switch
- Custom harness options (you tell us what you need and we deliver)