With the new AEM X-Series GPS Speedometer (30-0313) you’ll be able to quickly get an accurate speed reading in a very compact gauge. Maybe you’re changing wheel and tire size often or you’re just wanting a sleek and clean interior with minimal gauges the AEM X-Series GPS Speedometer will definitely do the trick. Instead of trying to figure out which vehicle speed sensor will work properly for your application whether that is a unique swap or significantly different tire sizes you can rely on a GPS signal for unparalleled accuracy at all times.
AEM’s X-Series GPS Speedometer displays ground speed, course and altitude via an included 10Hz GPS receiver that updates from multiple satellites at 10 samples/second providing excellent accuracy and reliability. You’ll be able to integrate the X-Series GPS Speedometer into an Infinity ECU, Series 2 EMS or EMS-4 to add track mapping to your data logs. An included Vehicle Speed signal can be outputted to an existing speedometer to eliminate the need for a vehicle speed sensor. You can also use the speedometer by itself if you are not running an AEM EMS.
.The GPS receiver includes a magnet and adhesive bottom for exterior mounting on the vehicle.
- Displays ground speed, heading and altitude
- Center LED displays ground speed up to any MPH (the outer LEDs display a maximum speed of 160 MPH).
- Integrate with the Infinity ECU, Series 2 or EMS-4 via AEMnet CAN bus to add track mapping!
- Transmit vehicle speed to an existing speedometer without needing a Vehicle Speed Sensor
AEM X-Series Gauges Features:
X-Series Gauges have a bright four-digit LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance. X-Series Gauges come with a black bezel and faceplate, and an optional silver bezel/white faceplate accessory kit is available (sold separately).
Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.