Clutch Masters FX350 Clutch Kit (Dual or Single Mass Compatible) for 2017-2021 Honda Civic Si & Ex.
When upgrading the 1.5L Turbo engine in your Civic quite quickly the stock clutch becomes incapable of supporting power upgrades and more aggressive driving on a race track. The FX350 clutch kits have a 110% increase in holding capacity over factory clutch, slightly increased pedal pressure, and is a must have to put the power to the ground!
The FX350 System uses the Power Plus I, Hi-Leverage, Heavy-Duty Pressure Plate utilizing Clutch Masters Fiber-Tough friction material un-sprung disk. While the FX350 has slightly increased holding capacity compared to the FX300, the most prominent difference between the two is the slightly more aggressive engagement and increased longevity due to the Fiber-Tough material on the clutch disk. This kit is specifically designed for the serious street enthusiast and weekend racer who has moderate modifications to their Civic like cams, a bigger turbo, 100hp Nitrous shot, and most importantly one of our infamous Brewed tunes.
Slight clutch chatter is common and normal with this clutch kit due to increased holding capacity.
Included in this kit:
- Heavy-Duty Segmented Fiber-Tough Disc
- Heavy-Duty Un-Sprung Hub
- Marcel Spring Wafer
- OEM or better Release Bearing
- Pilot Bearing
- Alignment Tool
- Instruction Card
**This non dampened disc can be used with a dual mass flywheel and single mass flywheel. You will have more aggressive engagement with this disc on a single mass flywheel and or chatter is possible. See 08150-HDFF-D for sprung hub version**
What others are saying
There are no contributions yet.