The Radium Engineering Fuel Tank Pickup Kit (20-0154) was designed to work in conjunction with the Radium Engineering Fuel Pump Inlet Adapter (20-0145) for when an internal pump is mounted above the fluid level of the fuel tank or fuel cell.
Included is a 2-1/4″ OD x 1-1/2″ tall mesh fuel filter with a barb adapter that is placed at the bottom of the tank. It features a 149 micron filter made from 304 stainless steel.
This kit is extensively used with the Radium Fuel Cell Surge Tank (20-0140-00) when using a deep fuel cell with a complex shape. Two different pickup tubes are included and are used depending on the depth needed: 6″ long PTFE rigid tube and 13″ long convoluted PTFE tube (shown below).
To protect the pickup from fuel slosh, strategically locate the mesh fuel filter in the tank or preferably place it in this Radium Engineering In-Tank Fuel Cell Collector Box (20-0150) if fuel starvation is an issue.
What others are saying
There are no contributions yet.