Injector Dynamics ID1300X SR20det & KA24de 1300cc

Here at Brewed Motorsports precision matched fuel injectors are a key ingredient in all of our projects and builds. The ID1300xds (formerly ID1300x) Injectors are a perfect match for any turbo SR20 or KA24 looking to make good power on ethanol or pump gas while maintaining a smooth OEM like idle. Everything from street cars making 400whp to full blown drag cars running staged fuel injection systems supporting 1000+whp. ID injectors are Brewed Motors 1st recommendation for any new fuel system.

Recommended Injectors for the SR20det & KA24de engines:

• ID1050 xds injectors KA24de SR20det (200-500HP and E85 safe!)
• ID1300 xds injectors KA24de SR20det (400-700HP and E85 safe!)
• ID1700 xds injectors KA24de SR20det (500-900HP and E85 safe!)
• ID2600 xds injectors KA24de SR20det (600-1500HP perfect for Alcohol fueled engines Ethanol/Methanol)

Etune Promotion: For those running one of our Motec A,EM Infinity or Haltech plug & play ECU packages we offer turn key base maps for all Injector Dynamic injectors free of charge with Injector orders.

ID1300xds Key Features

• Nominal Flow Rate – 1335cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
• Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
• Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
• Electrical Connector – USCAR
• The ID1300x was designed in partnership with Bosch Motorsports
• Price is per injector and includes the adaptor for the top and an injector clip with pins
• High Impedance, no need for injector drivers or injector resistors
• The high pressure and excellent atomization makes these are great option for high power N/A applications as well.
• High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
• Excellent low pulse width response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulse width response can be linearized to practically zero flow.
• Excellent consistency, no sets will require more than a 1% trim
• Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

ID1300x Injector Sizing

If you have any questions about injector sizing based on your power goals and the type of fuel used do not hesitate to contact us. We are happy to walk you through choosing the correct size injector for your build whether it a street car running on gasoline or a drag car on Methanol we are here to support your build every step of the way. The ID1300xds is the perfect match for anyone planning to make 80-120HP per injector. If you plan to make more power than that the ID1700xds and ID2600xds are all great options that support over 200hp per injector

Precision matched fuel injectors are a key ingredient in all of our projects and builds. Everything from street cars making 400whp and getting 40 mpg + to full blown drag cars running staged fuel injection systems for extreme fuel supply. ID1300x injectors go through an extensive flow matching processes that delivers the best tune-able injector on the market.