Injector Dynamics ID1300 XDS Fuel Injector

The ID1300 xds has quickly become the go to fuel injector for engines running on Gasoline or Ethanol blended fuels like E85. Flowing well over 1300cc of fuel at only 43.5psi with the ability to run at up to 101psi fuel pressure resulting in over 1600cc of flow. Not only do the ID1300xds injectors support big power they also idle like stock and offer perfect low throttle drive-ability. Here at Brewed Motorsports precision matched fuel injectors are a key ingredient in all of our projects and builds. Everything from street cars making 500whp and getting 35 mpg + to full blown drag cars running staged fuel injection systems for extreme fuel supply. ID injectors are Brewed Motorsports’ 1st recommendation for any new fuel system.

Special offer: For those running one of our Motec, AEM Infinity or Haltech plug & play ECU packages we offer turn key base maps for all Injector Dynamic injectors free of charge with Injector orders.

Key Features

• Nominal Flow Rate – 1335cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
• Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
• Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
• Electrical Connector – USCAR
• The ID1300x was designed in partnership with Bosch Motorsports
• Price is per injector and includes the adaptor for the top and an injector clip with pins
• High Impedance, no need for injector drivers or injector resistors
• The high pressure and excellent atomization makes these are great option for high power N/A applications as well.
• High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
• Excellent low pulse width response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulse width response can be linearized to practically zero flow.
• Excellent consistency, no sets will require more than a 1% trim
• Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

Vehicle Application Chart:

(last digit in part number indicates quantity required)