Link Plugin ECU for VR4 and 1G DSM
G4X Plug-In ECUs offer the latest in engine management technology, designed to easily maximize the potential from your VR4 or 1G DSM. This ECU fits inside the factory OEM enclosure for a super clean/sleek look. Installation is a breeze, with no alteration of the factory wiring loom required. If you want to run additional sensor inputs to the ECU simply purchase one of the expansion harness. Perfect for things like fuel pressure and flex fuel.
Vr4 and 1G DSM 4G63T Engine
- This ECU works for manual transmissions only.
- Includes onboard 4 bar or 7 bar MAP sensor.
- Knock control not available on this ECU.
- Most factory features are supported.
- Check the features tab for I/O expansion options.
- This ECU will need a modification before E-Throttle is usable.
Plug in Applications:
- Mitsubishi Galant VR-4 E38A (1987-1992) with 4G63T engine
- Mitsubishi Galant VR-4 E39A (1987-1992) with 4G63T engine
- 1G DSM with 4G63T engine
G4X VR4X Plugin ECU Key Features:
- Up to 6D fuel and ignition mapping
- Precision closed loop cam control (four cam, independent control)
- Sequential fuel delivery
- Digital triggering, all OEM patterns
- OEM idle hardware supported
- 5D boost control with three switchable tables
- Motorsport features – anti-lag, launch, flat shift
- Continuous barometric correction (on board)
- CAN port
- Quick Tune – automated fuel tuning
- Individual cylinder correction
- USB tuning cable included
- Stats recording into on-board memory
- Gear compensations for spark, boost and fuel
- Real time selectable dual fuel, ignition and boost maps
- Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical
- Boost control referenced to gear, speed or throttle position
- 512 mega bytes data logging memory
- Staged injection
Link ECU Expansion Connector 1
- Gnd Sensor Ground Only
- +5V Out Low Current +5V Supply
- DI 6 Digital Input for switching functions.
- An Volt 5 Analog 0-5V input
- An Volt 6 Analog 0-5V input
- An Temp 3 Temperature sensor input
Link Expansion Connector 2
- Gnd Sensor Ground Only
- +5V Out Low Current +5V Supply
- Aux 9 EThrottle – can’t be used as an Aux out
- Aux 10 Auxiliary Output
- An Volt 6 Analog 0-5V input
- An Volt 7 Analog 0-5V input
- An Volt 9 Analog 0-5V input
- An Volt 10 Analog 0-5V input
Please check your ECU plug matches the photo above before purchasing, if you have any doubts please send us a picture and we can ID your ECU for you. This ECU is for off road Motorsports use only. Never to be used on public roads within the USA. Please check your local laws/regulations before you modify any vehicle.
What others are saying
There are no contributions yet.