Treat your SR20det engine to a set of Brian Crower Valve Springs and Titanium Retainers (BC0200) and know you can confidently rev well above the OEM limiter while keeping your valve train happy and reliable at high rpms. The BC valve springs are wound from the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. We have been using these BC spring and retainer kits on numerous SR20 builds over the years with consistently good results and lots or fun drift days banging off the rev limiter. Don’t leave the OEM SR20 valve springs and heavy retainers in place, get the most out of your SR build and install a set of BC springs and Ti retainers.
Spring Pressure – Seat: 1.550″ @ 90 lbs / Open: 1.025″ @ 220 lbs / Coil Bind: 0.910″ (no machine work required)
Below is a picture of the Brian Crower springs and retainers installed on a customers SR20det that also received our Dual guided shim conversion perfect for those looking to rev 8500rpm+. If you have any questions about any engine machine work, don’t hesitate to contact us, we are a fully equipped engine machine shop as well.
For those not 100% sure which cams will best match their build don’t hesitate to reach out to us for support and advise, we are always happy to help walk you through the best options for your engine build.
To get the most out of your BC springs/Ti retainers we highly recommend using a pair or BC cams. We have been using BC cams in 95% of our SR20det builds and always happy with the power and reliability they deliver. Choose from the BC 264 SR20det cams perfect for a medium sized turbo like the G25 660 turbo or the big BC 272 SR20det race cams for those planning to run a big turbo and make big top end HP numbers.
**Check out the related products below for some of our most popular SR20 engine parts currently on sale!
Brewed Staff Eric_Brewed –
Super affordable spring and retainer kit that will keep your SR20 happy for years to come even at high rpm! The OEM SR20 valve springs and heavy steel retainers in the SR20 do not love high rpm or big cams. If you plan to really push your SR I highly recommend using these stiffer springs and Titanium retainers.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal