Velocity Element’s Plug & Play Aem Infinity Harness for the USDM IS300 with 2JZGE VVTi engine is a plug and play solution for your oem 2JZGE VVTi to the Infinity 506 or 508 ECU. The VE Plug and Play 2jz vvti harness supports Infinity controlled VVTi and OEM DBW support. Setting up the AEM Infinity ECU to control the VVTi and DBW (manual trans) on the IS300 allows the engine to be tuned flawlessly for reliable performance under any condition. By fine tuning the VVTi through the Infinity the engine is able to make reliable repeatable power time and time again. Cars with manual transmissions can also take advantage of full OEM Toyota DBW control on the Infinity ECU. If you want your IS300 to drive like a Lexus and make big power with a reliable ECU this is the package for you.
IS300 2jz VVTI plug n play Infinity Harness Features
All Plug and Play VE harnesses and Infinity ECU packages get you an instant $100 credit towards any of our custom tuning services. This includes base map services perfect for safely getting the engine running or our full Etune service for those that want a complete tune providing the best performance and reliability possible. Want to learn more about our tuning services? Check out the links below to get a better idea of exactly what we are up to.
- AEM Infinity Etune service for IS300
- AEM Infinity wide band knock sensor and ignition timing explained
- E tuning and data logging explained
IS300 to Infinity ECU Harness Expansion Ports / Connectors
The Velocity Element plug and play harness for the Lexus IS300 includes a 6 pin DTM Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, oil pressure/temp, air inlet temperature, shaft speed, VE wide band Knock sensors, exhaust MAP and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. Combine this with full DBW and VVTI support for the 2jz and you have an easy to use complete wiring harness to get your 2jz vvti engine working perfectly in any chassis you can dream up.
VE Harness Expansion options:
- Traction Control 4 pin DTM connector
- 12 position map select switch 3 pin DTM connector
- Expansion harness for accessory sensors (up to 12 pin DTM connector)
- DBW DTM connector (let us know what drive by wire throttle you are using)
- Anti Lag solenoid output
- Rolling Launch switch
- Custom harness options (you tell us what you need and we deliver)