With the AEM X-Series Water / Trans / Oil Temperature Gauge (30-0302) you’ll be able to keep a sharp eye on those critical fluid temperatures and catch an issue before it spells catastrophe. This gauge is a must if you want highly accurate water, oil, or transmission temperature readouts! With the AEM X-Series gauges not only will you know what temperature your fluids are at, you’ll be doing it in style. With the X-Series gauge’s ability to program alarm thresholds that will alert you if something is not where it should be, you’ll know right away that something is wrong. By having an alarm you’ll be able to focus on driving the car instead of worrying about checking your gauges making sure that everything is in order.
**NOTE: The 30-0302 comes with a black bezel and black water temperature faceplate. You will need to purchase the optional 30-0302-ACC accessory kit to get the silver bezel, white water, transmission and oil temp faceplates, and black transmission and oil temperature faceplates. Each faceplate is double sided with standard PSI on one side and metric BAR on the other. The calibration for standard or metric display is easily performed using the buttons on the face of the gauge.
AEM X-Series Gauges Features:
Easier To Read
Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.
Easier to Mount
Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.
X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.
What others are saying
There are no contributions yet.