Injector Dynamics ID2600-XDS Fuel Injector

ID2600 XDS Injectors

The ID2600-xds has officially replaced the 2000cc ID2000 injectors! Here at Brewed Motorsports precision matched fuel injectors are a key ingredient in all of our projects and builds. The ID2600xds injector can operate at up to 130psi supporting over 4500cc of flow in a single high impedance injector. The ID2600 Xds fuel flow will support over 200HP per injector and is designed to work with any Alcohol or Gasoline based fuel. ID injectors are Brewed Motors 1st recommendation for any new fuel system and if you are building a HIGH power engine the 2600-Xds injectors are for you.

Etune Promotion: For those running one of our Motec, AEM Infinity or Haltech plug & play ECU packages we offer turn key base maps for all Injector Dynamic injectors free of charge with all injector orders.

ID2600-Xds Injector Features:

• Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
• Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt
• Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
• Electrical Connector – USCAR
• Has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x
• Developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol
• Benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths
• Price is per injector and includes the adaptor for the top and an injector clip with pins
• High Impedance, no need for injector drivers or injector resistors

Injectors Dynamics Vehicle Application Chart Below:

2600-xds Fitment and sizing: Please have a look at the application list below to find the correct part number for your engine/car and select that part number. If you have any questions or concerns about fitment or sizing do not hesitate to contact us, we are happy to help make sure you get the right injectors for your build!

First number represents injectors flow, second number represents injector height Oring to Oring, 3rd and 4th number represents upper and lower Oring diameter, last number represents quantity of injectors. If you have any questions at all regarding any Injector Dynamics fitment do not hesitate to contact us. Our team has years of experience using ID injectors are we are happy to ensure you get the correct Injectors at the best pricing guaranteed.

If you have any questions about injector fitment or sizing don’t hesitate to give us a call or contact us by email, we are always happy to provide tech support for your projects and builds.