PRP RB Series Cam Trigger Kit – RB20, RB25 & RB26
$335.00 – $365.00
The PRP RB engine Cam trigger kit is a key part of any high power RB engine build. Here at Brewed we have been using both the PRP Cam and Crank trigger kits on all our high power GT-R builds to ensure the ECU always gets the most accurate engine position data possible. By moving the cam sensor pick up to a 1 tooth trigger on the cam gear the ECU is guaranteed to have the most accurate cam signal possible. When combined with a Crank trigger signal the ECU can then deliver 100% accurate ignition timing under any condition. Forget about the old OEM Nissan CAS (cam and crank sensor 1 piece unit) and belt stretch problems, upgrade to the most reliable and modernized cam trigger kit on the market.
Have a question?
Call us at 1-888-290-3213
The Platinum Racing Products RB Cam Trigger kit came to life through research and development on the race track. Designed to provide precision cam position data to the ECU while adding some exta bling to your engine bay.
The cam/crank triggers are 2 of the most important aspects to consider for your RB engine build as the OEM cam/crank sensor is prone to inaccurate readings that lead to all sorts of problems do to “timing belt stretch”. With the PRP cam trigger kit you can rest assured the ECU will be receiving consistent and accurate cam position data under all conditions. Don’t let the stock CAS hold your RB back from it’s full potential! Click here if you are looking for the complete PRP Cam/Crank Trigger kit for the RB.
*Note this is only the Cam trigger kit, the RB series engine will also need a Crank trigger signal such as the PRP crank trigger kits or the Ross eng. trigger kits.
**Works with all Nissan RB twin cam engines. Also works with the CA18.
RB Cam Trigger Design Features:
The cherry hall effect magnetic pickup sensor used has quickly become the industry benchmark for accurate engine position data and is easily replaced if lost or damaged. The cam sensor brackets are light weight, simple and easy to install or service.
- Billet alloy brackets.
- Engineered timing gear with incorporated triggers.
- Custom colors available upon request.
- Bolt kit with all parts needed
- Lifetime warranty on all Platinum Racing Products hardware
PRP Trigger kits in action
Here at Brewed Motorsports we work with a lot of GT-Rs and RB26 engines. Below are a couple examples of recent R34 GT-R’s we set up with PRP cam/crank trigger kits coupled with our R34 Plug & Play AEM Infinity ECU kit. These cars were tuned on pump gas and really show just how much can be done when the RB engine is matched with good sensors and a modern ECU.
Check out our blog for more details on the PRP RB engine trigger kits to lean what makes these kits so special and why we use them on 95% of our RB engines from street to race! PRP RB26, RB25 RB20 crank and cam trigger kits explained and installed.
Brand
Platinum Racing Products
Share your thoughts!
Let us know what you think...
What others are saying
| Make | Model | Year |
|---|---|---|
| Make | Model | Year |
| Nissan | Cefiro (A31) | 1989 - 1994 |
| Nissan | Cefiro (A31) | 1989 - 1994 |
| Nissan | Skyline (R32) | 1989 - 1993 |
| Nissan | Skyline (R32) | 1989 - 1993 |
| Nissan | Skyline (R33) | 1993 - 1998 |
| Nissan | Skyline (R33) | 1993 - 1998 |
| Nissan | Skyline (R34) | 1998 - 2002 |
| Nissan | Skyline (R34) | 1998 - 2002 |
| Nissan | Skyline (R34) | 1998 - 2002 |
| Nissan | Skyline GT-R (BCNR33) | 1995 - 1998 |
| Nissan | Skyline GT-R (BNR32) | 1989 - 1994 |
| Nissan | Skyline GT-R (BNR34) | 1999 - 2005 |
You may also like…
Electronics
Electronics
Brewed Staff Eric_Brewed –
Hands down the simplest and best looking RB26/25/20 cam trigger kit on the market. We use this kit on 95% of the RB engines we build and tune for our customers and they have worked perfectly each and every time.
(0) (0) Watch Unwatch
DC –
can you run this in replacement of the original cas and not need to get a tune or a crank sensor ?
(0) (0)
Eric_Brewed –
you will need to have the car tuned when using an aftermarket cam or crank trigger kit.
The OEM CAS is a cam and crank sensor combo. If you replace the oem cas you will need a cam/crank sensor not just a cam sensor. We offer a wide range of cam and crank sensor kits for the RB with separate cam/crank pickups/sensors as well as OEM style that position the cam/crank sensors both on the cam gear.
(0) (0)