Radium Fuel Filter Kit for Nissan S and R Chassis

Radium Fuel Filter Kit for S12/S13/S14/S15/R32/R33/R34/S130

We at Brewed Motorsports are all about serviceability, ease of installation, and quality. The Radium fuel filter kit checks all these boxes for us while also protecting our injectors from contamination without sacrificing flow.

The factory Nissan fuel filter is plumbed between the fuel pump and the fuel rail. This Radium Engineering kit is an OEM fuel filter replacement (Nissan S13 shown below).

The Radium kit installs in less than an hour for a true Bolt On experience. No cutting or drilling of the chassis is required just couple of wrenches, screw driver and pliers is all that is required. (the old OEM fuel line can be hard to pull off the oem fuel line and fuel rail. A little lube goes a long ways, you can also slit the old fuel line to make it easier to pull off if needed.

Because the Radium filter is less restrictive than the OEM Nissan filter, there is less stress put on the fuel pump. Lower pre filter pressures permit less current draw and thus lower fuel temperatures. This phenomenon permits an increase in fuel flow. Nissan S15 shown above and Nissan R32 shown below.

The Radium filters can withstand alternate fuels such as methanol, ethanol, E85, Flex Fuel, etc. These fuels are becoming more common as they enable the engine to make more power with more reliability compared to using gasoline based fuels.

Included:

• Selectable Fuel Filter Element
• Anodized Aluminum Filter Housing
• Anodized Aluminum 2-Piece Clamp
• Anodized Aluminum Fittings
• Large 6AN Rubber Fuel Hose
• Stainless Steel Hardware

Full Fitment Details:

Nissan S13 Silvia (All models/trims/RHD/LHD)
Nissan S13 180SX (All models/trims/RHD/LHD)
Nissan S13 200SX (All models/trims/RHD/LHD)
Nissan S13 240SX (All models/trims/RHD/LHD)
Nissan S14 Silvia (All models/trims/RHD/LHD)
Nissan S14 200SX (All models/trims/RHD/LHD)
Nissan S14 240SX (All models/trims/RHD/LHD)
Nissan S15 Silvia (All models/trims/RHD/LHD)
Nissan S15 200SX (All models/trims/RHD/LHD)
Nissan R32 Skyline (All models/trims/RHD/LHD)
Nissan R33 Skyline (All models/trims/RHD/LHD)
Nissan R34 Skyline (All models/trims/RHD/LHD)
Nissan S12 Silvia (All models/trims/RHD/LHD)
Nissan S12 180ZX (All models/trims/RHD/LHD)
Nissan S12 190SX (All models/trims/RHD/LHD)
Nissan S12 200SX (All models/trims/RHD/LHD)
Nissan S12 Gazelle (All models/trims/RHD/LHD)
Nissan S130 280ZX (All models/trims/RHD/LHD)

**An extra 90* PushLok hose end is provided for aftermarket fuel rail applications that have a 6AN male inlet fitting. This ensures easy install on ANY S or R chassis with OEM or aftermarket fuel rail.