Proper fuel delivery is arguably one of the most critical components for those looking to get all the power they can safely and reliably from any SR20det engine setup. The OEM fuel rails are incredibly restrictive and impede the fuel delivery to the injectors under high fuel pressures, where consistent fuel pressure is absolutely necessary. With the Radium Engineering Fuel Rail kit for the S14 or S15 Nissan SR20DET (20-0359) you can make sure that your fuel rail is able to flow all the fuel you can push through it!
This fuel rail kit is a direct bolt-on for all S14 and S15 SR20DET engines and features a large 0.69″ ID bore to suit even the most fuel hungry engines. The fuel rail converts the OEM side feed fuel injector setup to top feed allowing the use of high flowing 14mm fuel injectors. The rail is CNC machined from solid 6061 aluminum, media blasted, black-dipped anodized and laser etched for a high quality surface finish. It is compatible with all fuel types including popular alcohol mixtures such as E85.
Special fuel rail, Injector & tuning package: Pair any SR20det radium fuel rail with a set of Injector Dynamics Injectors and get a FREE base map for Motec, AEM Infinity, Cobb or Haltech with purchase of Injectors.
What’s Included:
All parts listed below are included for a trouble and leak-free installation.
- Black Anodized Aluminum Fuel Rail
- Green Anodized Aluminum Mounting Bolt Spacers (x3)
- Green Anodized Aluminum 25mm Injector Seats (x4)
- Black Anodized Aluminum IACV Spacer Kit
- IACV Gasket, SR20DET S14/S15 (x1)
- Black Anodized Aluminum IACV Barb Adapter
- Rubber Hose and OEM Clamp for IACV
- Stainless Steel M8x1.25 Mounting Bolts (x3)
- Stainless Steel M6x1 Mounting Bolts (x3)
NOTE: This fuel rail kit does NOT come standard with fittings. Fittings are purchased separately, please contact us for fitting options!
Fuel Injector Compatibility
The kit includes 2 sets of phenolic spacers (shown above in the kit contents) to suit multiple height injectors. The spacers are machined from phenolic material and offer excellent resistance to heat transfer.
Use the tall spacers and longer mounting bolts to accommodate this size injector:
Below are some of the many fuel injectors that are a direct fitment with this Radium fuel rail kit:
- Injector Dynamics ID1000-48-14
- Injector Dynamics ID1300-48-14
- Injector Dynamics ID1700-48-14
- Injector Dynamics ID2000-48-14
Use the shorter spacers and mounting bolts to accommodate this size injector:
Below are some of the many fuel injectors that are a direct fitment with this Radium fuel rail kit using the short spacers:
- Injector Dynamics ID1050x-34-14-14
- Injector Dynamics ID1300-34-14-14
- Injector Dynamics ID1700-34-14-14
- Injector Dynamics ID2000-34-14-14
NOTE: Fuel Injectors are NOT included with the fuel rail and must be purchased separately.
Port Configuration
The picture below shows how the fuel rail ports are threaded.
Fuel Pressure Regulator Options:
The fuel rail can be plumbed to a remote aftermarket pressure regulator using -AN hose and fittings. Or the options below can be used to mount the pressure regulator directly to the fuel rail.
The front port on this fuel rail is compatible with the Radium Engineering Direct Mount Regulator as shown below.
Note: Verify hood clearance is available before installing.
Or the stock regulator can be used in the rear port when installed with the Radium Engineering FPR Adapter (14-0165).
Optional Accessories:
Fuel Pulse Damper
Do I need a pulse damper (FPD)?
The opening and closing of the injectors creates pressure pulses in the fuel rail, which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a pulse damper should be used (especially with high flow injectors). The internal diaphragm will absorb oscillation pulses and stabilize fuel pressure. The bottom center port on the Radium fuel rail for the KA24DE engine is an ideal location for a damper. It is compatible with Radium Engineering FPD-R (20-0176) or the Radium Engineering FPD-XR (20-0177), as seen in the picture below of an S13 sr20 manifold/rail. Both of these dampers will work no matter what fuel rail mounting spacers are used. Not sure what damper to use, contact us and we will make sure you get the right one for your application!
What others are saying
There are no contributions yet.