FWD SR20de AEM Infinity ECU Plug & Play Package

SR20 AEM Infinity 506 FWD ecu package

We now offer a complete plug and play AEM Infinity ECU packages for all B13 and B14 SR20de and SR20det and SR20ve engines. Our turn key package consists of the VE plug n play adapter harness + AEM Infinity 506 ecu + Brewed Custom base map. This is a plug and play package ready complete with base map to get your engine started when combined with our SR20 fuel systems utilizing Injector Dynamics injectors. These AEM Infinity packages have quickly become one of our most popular SR20 ECU kits delivering big smiles to SR enthusiasts around the world thanks to features like Rolling Launch Anti-lag, Flex Fuel and individual cylinder trims.

**Click here if you are looking for the RWD SR20det AEM infinity package. (Rear wheel drive Silvia, 180sx, 200sx, 240sx, etc.)

Velocity Element’s Plug & Play Adapter Harness for the Nissan SR20 engine is an easy to use plug and play solution for your SR20 powered Nissan or what ever else you may have swapped over to use the SR. This package is available with both the Infinity 506 (30-7106) or 508 (PN 30-7108) ECU. We have been using this plug & play Infinity package on a wide range of SR’s with great success.

SR20 plug n play Infinity Harness Features

All Plug and Play VE adapter harness’s and Infinity ECU packages get you an instant $100 credit towards any of our custom Etune services. This includes our full Etune service for those that want a complete tune providing the best performance and reliability possible. Want to learn more about our tuning services? Check out the links below to get a better idea of exactly what we are up to.

• Aem Infinity Etune services. (Motorsports ONLY)
• E-tune and data logging explained. (Remote tuning)

VE Plug & Play Adapter Harness Standard Expansion Ports

The Velocity Element plug and play adapter harness for the SR20det and SR20de includes a 6 pin DTM Wideband O2 connector, AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a Deutsch DTM 12P connector for adding common aftermarket sensors including fuel pressure, oil pressure/temp, air inlet temperature, shaft speed, VE wide band Knock sensors, exhaust MAP and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. For those who have added DBW or any other accessories we are here to support and offer custom plug and play harness options for anyone looking to expand and utilize more of the ECU’s supported features such as Drive By Wire.

VE Harness Expansion options:

• ​Traction Control 4 pin DTM connector
• 12 position map select switch 3 pin DTM connector
• Expansion harness for accessory sensors (up to 12 pin DTM connector)
• Coil on Plug conversion sub harness (Optional)
• DBW DTM connector (Optional)
• Anti Lag solenoid output
• Rolling Launch switch
• Custom harness options (you tell us what you need and we deliver)