AEM X-Series Boost Gauge 35psi 30-0306

AEM X series boost gauges are the perfect solution to monitoring your engines boost pressure. Without a proper boost gauge to monitor intake manifold pressure you’ll have no idea if something is wrong until it’s too late and the race is lost, or worst, the engine is toast. With the AEM X-Series boost Gauge (30-0306) you’ll be able to keep a sharp eye on critical boost pressure and catch any issue before it causes a bigger problem. With the X-Series gauge’s ability to program alarm thresholds that will alert you if something is not where it should be, you’ll know right away that something is wrong. By having an alarm you’ll be able to focus on driving the car instead of worrying about checking your gauges making sure that everything is in order. This gauge is a must if you want a highly accurate boost pressure readout! Those looking for a temperature sensor/gauge combo can use the AEM oil temperature X series Gauge.

Here at Brewed Motorsports we also use the AEM X series fuel and oil pressure gauges on our engine builds to provide an easy monitor for the driver and also to incorporate the fuel and oil pressure data into the ECU calibration or Tune. Check out our Blog that breaks down exactly how using an AEM X series oil/fuel pressure gauge or sensor in combination with an aftermarket ECU allows the tune/calibration to be set up to add increased performance and reliability to your engine. AEM X series fuel pressure gauge/sensor setup and tuning AEM Infinity ECU.

**NOTE: The 30-0306 comes with a black bezel and black oil pressure faceplate. Face plate is reversible with PSI and BAR measuring units so you can choose your favorite or match your other gauges.

AEM X-Series Gauges Features:

Easier To Read

Visual improvements include a bright center LED display that is 87% larger than our original digital gauges and provides better readability. A sweeping green LED “needle” lines the edge of the gauge face for quick reference. A 33% overall increase in the gauge face display makes it easier to see at a glance.

Easier to Mount

Despite the larger display, X-Series Gauges are contained in a standard 2-1/16th-inch (52mm) diameter housing for mounting in a standard gauge pod. Thanks to an advanced single board design, X-Series Gauges have an incredibly slim overall depth of under 0.825”, with a cup depth of only 0.200.” This shallow cup depth allows X-Series Digital Gauges to be mounted practically anywhere.

Smarter Interface

X-Series Digital Gauges include new technological features that make them easier to use. Two buttons on the faceplate deliver programmability for peak/recall, standard or metric center LED readout and sweeping LED needle, and user-selectable threshold warnings. The gauges are AEMnet CAN-bus enabled, so they can be daisy chained together for use with the Infinity ECU, Series 2 EMS, AQ-1 Data Logger, or 3rd party EMS or logger that accepts AEMnet. 0-5V analog outputs are also included for inputting into data loggers and engine management systems.